8 min read
In-House Engineer or Project-Based Consulting?
How does the employment of permanent engineers compare with project-based engineering consultancy? Decision guide based on total cost, workload continuity and risk.
BLOG
Engineering Consulting
Technical consulting and industrial engineering support
6 min read
Modal Analysis: Avoiding Resonance, Not Silencing Vibration
What is modal analysis, why is resonance dangerous? Natural frequency, drive frequency separation and preventing vibration problems in design — a practical guide.
7 min read
Finite Element Analysis (FEA): Not Breaking the Part, but Predicting Where It Will Break
What is finite element analysis (FEA) and when is it reliable? Mesh convergence, stress singularity, and the importance of verification with ASME V&V 10 — a practical guide.
6 min read
Unmanned Production (Lights-Out): Not Just Speeding Up the Machine, But Running it at Night
What is unmanned production (lights-out machining) and under what conditions is it possible? Practical guide to reliable process, tool life, automatic feeding and gradual changeover.
6 min read
Energy Efficiency in Production: Not Producing More, Producing with Less Energy
Where does energy efficiency in production start? Compressed air leaks, efficient engines, VSD and the impact of design decisions on the energy footprint — with official sources.
7 min read
Weld Distortion Management: Preventing Distortion, Not Correcting It
What causes weld distortion and how can it be prevented? Distortion control through heat input, welding sequence, fixturing and design decisions — with TWI welds.
6 min read
Agentic AI in Manufacturing: Automating Repetitive Engineering Work
What does agentic AI do in manufacturing and engineering? Actual areas of use, which tasks can be delegated, and the limit of human control.
7 min read
Engineering Plastics Instead of Metal: Match the Material to the Load
When can engineering plastics such as POM, PA, PEEK replace metal? Strength, temperature and creep limits; comparison with manufacturer data.
6 min read
Localization (Reshoring): Producing Closer, Not Simply Cheaper
What is localization (reshoring) and why is it accelerating? Supply chain resilience, total cost accounting and how design facilitates localization.
6 min read
Industry 5.0: Putting Machines Alongside People, Not in Their Place
What is Industry 5.0, how is it different from Industry 4.0? The European Commission's human-centred, resilient and sustainable production framework and its practical meaning for SMEs.